SmithFly Invents Way of Attaching Fishing Gear to Coolers

SmithFly_CoolerKilt2

SmithFly Invents Way of Attaching Fishing Gear to Coolers
Cooler Kilts Help Small Watercraft Fishermen Carry and Store Gear

DAYTON, OH (October 22, 2013) — Innovative fly fishing gear maker SmithFly Designs will launch the Cooler Kilt, a one-of-a-kind product enabling pouches to be attached to coolers, on November 25.

By snapping directly to a cooler, the Cooler Kilt keeps gear consolidated, out of the way, and easily accessible. It was designed for people fishing on small watercraft, including stand up paddleboards, kayaks, and micro skiffs, as well as spin-and-bait casting fisherman and hunters.

Many anglers keep coolers on board of their watercraft to carry water, lunch, snacks, and beverages. They also carry cumbersome bags that are intended for wading. SmithFly owner and fisherman Ethan Smith set out to design a product that easily enables people to attach their gear directly to the front of their coolers.

“There wasn’t a good solution for carrying fly boxes and tackle on the water while fishing from smaller, more nimble boats,” said Smith. “Now you can haul your gear and your beer in one trip from the truck to the boat. The Cooler Kilt lets you put your stuff right where you can access it, without any hassle.”

Cooler Kilts are made in the U.S.A. and will be available in five sizes accommodating cooler sizes from 25 to 65 quarts. They’re constructed of 1000D Cordura, and feature multiple rows of Mil-Spec nylon webbing with one-inch tactical bar tacks. The back of each kilt has snaps that attach to coolers. The snaps are available as stainless steel self-tapping screws similar to those of boat covers, or as pressure sensitive adhesive pads with snap heads.

Preorder for the Cooler Kilt, which starts at $45 (including shipping), is available beginning on October 28. For more information and to place a preorder, visit smithfly.net/2013/09/21/cooler-kilt.

About SmithFly Designs

SmithFly Designs offers American made fly fishing vests, tackle bags, waist packs, belts, and pouches with interchangeable parts that enable fly fishermen to customize their gear. It was founded by designer and fly fishing blogger Ethan Smith in 2010 and is based in Troy, Ohio. Visit smithfly.net to learn more.

SmithFly_CoolerKilt1

 

Cheesy_Stock_Photo_SmithFly_Cooler_Kilt

SmithFly Digi-Pouch makes cameo appearance in BF Goodrich’s Playground Earth Episode 3 “Browns Rising”

Through creative editing most soft goods brands like SmithFly, even the big names, were not featured very prominently in this episode of BF Goodrich’s Playground Earth. But if you watch carefully, and we know you will, a SmithFly Digi-Pack makes a cameo appearance at min 2:36. After all BF Goodrich paid for the production and it wasn’t cheap so we TOTALLY understand why they wouldn’t want our name plastered all over their cool video, we get it.

But yeah we still made the cut, which is pretty awesome and proves that we aren’t making this stuff up.

Louis actually likes the Digi-Pouch. Here is a link to his effusive review:

The Smithfly Switch Belt and Digi pouch, Fly Fishing Gear That I Can’t Live Without

Digi_Pouch

The choice of music is rather nice too, some claw hammer banjo stuff. We love that! Our complements to the production team on selecting some evocative music that captures the contemplative nature of fly fishing. Wait, did I just use contemplative and banjo in the same paragraph? Ah well…

Do you know what the three most difficult years in a banjo players life are?

3rd grade…

SmithFly 3X Pouch now available – get yours today, before they sell out.

3X_Keys_LR

The SmithFly 3X Pouch is now available.

Groceries, meat, gym socks, heavies, call them what you want but now you don’t ever have to leave the big stuff at home ever again. The 3X is our biggest pouch yet and will hold more than you can imagine and remain comfortable all day.

It’s is designed to fit across the outside of the Switch Bag and also be a comfortable foundational part of our Switch Belt. It is zippered all the way around on three sides to allow for complete access to all you gear with a flip down front. The inside has four divider pockets to keep you stuff organized. The front panel is covered with three rows of MOLLE webbing that let you hook up our other pouches and components like a 1X or El Poquito. The back has four MOLLE straps to hook it up to whatever platform your hauling that day. It will work by itself on any wading belt out there and it will also hook up to just about any backpacks or sling packs with any size webbing anywhere on them. Now that’s flexibility!

Size: 12″ x 6″ x 1 1/2″

Availability: Currently In Stock; usually ships next business day.

3X_Front_LR

3X_Inside_LR

3X_Zipper_Detail_LR

The Cuda-sectomy — or do not take a pic of a cuda with your junk hanging in the water.

Cuda_Camo2

After my epic skunk-a-thon on the flats in the middle keys, I decided to search the flats the next day for for the elusive bonefish near Key Biscayne. After calling every guide I knew and few I didn’t, to get the skinny, it sounded like there were fish to be had in the area after the water temps warmed. The INTEL was solid and my chances only slightly greater than the day before. (See next post down for full Skunk report, and casting practice/line review)

After a half hour turning coral into fish I had a couple shots at small fish working the perimeter of the flat. They were up shallow, tight to a transition, in warmer water and spooky. The actual fish moved on and my hallucinations continued. However none of the specters left in a cloud of mud like the others, the just sat there like rocks and swayed in the current and with the flat light. Nothing.

As the day moved on the wind pounded the flats and sun warmed things a bit. Nothing more in the sand, so I moved out a bit further to deeper water, a little over junk-deep to be exact, cool and refreshing.

I moved into a wide expanse of turtle grass, pock marked with blue holes. The holes were deeper, and fishy looking.

After a few casts, BANG, hefty tug and solid run — fish on. It’s CUDA-time.

I took a couple pics and released the little toothy hammer handle and tied on some heavier tippet and bigger Clouser. Bang another fish, a bit bigger this time. Bigger fly bigger fish, bigger teeth, bigger fight.

Landed a few more of those and released them one handed while holding my camera to take pics, the bigger they got the more feisty they remained in hand, and the more threatening the teeth became.

I tied on straight 20lb mono and a 3/0 olive and white Clouser. I laid out a cast to the drop-off that was holding fish and a NICE shadow trailed my fly as I stripped. Really even strip, follow, follow — BANG. A nice CUDA on!

So I let this one run a bit to try and wear it out. He took me into the backing a few times and the popped off, cut the line — toothy bastard.

Re-tied, 20lb mono – 3/0 Olive and White Clouser.

Follow, strip, follow, strip, follow, – BANG, another fish on, plaid this one even more cautiously — loosed my drag, really let him run — then horsed him in quick. Unrolled my SmithFly Digi-Pouch with one hand, to get out my D-90 to snap a nice photo. Swung him in close to grab with the other hand. Reached out to grab him and he sped off on another run.

I horsed him back after a short burner, they’re runs are short and fierce but over quickly, then it’s like reeling in a log. Brought him back over to me quickly. When I reached down to grab him with one hand, camera in the other, he slashed in the water away from my hand and moved right for my junk, mouth open with 3/4″ long fangs barreling down on my business which is at fish eye level dangling in the cool water, only a thin layer of 15 year-old quick-dry ExOfficio Nylon and some boxer shorts between me and certain CUDA-sectomy or worse yet, CUDA-stration.

Luckily, a well placed blow to the beak of the beast deflected the critter’s invasion of my privacy, but still it was a close one. I pulled the hook and released the fish, a nice long slender torpedo. A perfect shining silvery predator, swam back across the blue hole and disappeared into the distance.

Lesson learned — when in junk deep water, always put TWO hands on a big CUDA – a picture just ain’t worth it.

Needless to say no pics of the big ones.

Cuda_1

Hammer Handle

Cuda_Fin

Cuda Fin

One handed operation for the Digi_Pouch

One handed operation of the SmithFly Digi-Pouch.

Flats_Camo

Beautiful flats camo.

SmithFly Stream Team Growing by leaps and bounds… here are the new additions.

New_Team_Grid

So after the AMAZING response from my partnership with the The Fiberglass Manifesto for the Stream Team giveaway, we thought there were some more people, in addition to Grand Prize winner Mr. Nick Bertrand, that we would add to the list of ambassadors on the Stream Team.

So without further adieu, I am pleased to announce the new additions to the SmithFly Stream Team.

Brent Wilson – Uprising Blog
Chase Hundley – Feathers and Scale
Geoff Pratt – Global Fisher
Henry Jackson – Flint River Kayak Fishing
Jason Tucker – Fontinalis Rising
Jay Eubanks – The Naturalists Angle
Brian Kozminski – True North Trout
Mike Sepelak – Mike’s Gone Fishing… Again.
Dave Zielinski – The Happy Trout Chronicles
Rick Mikesell – Trout’s Fly Fishing

Please pay a visit to their sites and read up.

It’s all good stuff!

Thanks guys.

The new SmithFly Digi Pouch, get ’em while they last!

A Digi Pouch Mounted to the SmithFly Switch Belt, boom, ultra dry, ultra comfy, way to carry a ton of other stuff on waist, damn it feels good to be a gangsta.

We just launched a first of it’s kind MOLLE webbed roll Top Dry Bag for a DSLR! BOOM! See this link to pre-order yours today, this limited run might not last long.

Constructed of heavy duty  welded 18 oz vinyl the Digi Pouch is a first of it’s kind roll top dry bag that attaches to MOLLE webbing. Working with a top USA based Dry bag manufacturer we developed a unique way incorporate our MOLLE webs onto a welded patch in the back of the bag, leaving it water tight. That means that this little ditty will attach to anything and everything without re-stringing your webs. It also attaches to all of our backbones like the Switch Belt or Switch Bag or any other MOLLE webbed thing out there, and there’s a bunch.

The snaps on the webs allow it to attach to belts that don’t unthread from their pads, like those on big alpine/ hiking style backpacks etc. So if you want to carry a DSLR on a the waist belt of a big Gregory Palidsade you can do that without detaching and unthreading all that webbing on the belt or the cynch straps. See now this thing works with a LOT of other stuff.

It’s one of those things that we’ve wanted for a long time now, because we carry big DSLRs with us very frequently and in places that get pretty nasty and wet.

So for all you photo geeks who like to pack lenses and big Digi cam into the wilderness, now you can have it mounted securely to you pack in a dry place.

Our vendor is kind enough to work with us on a small trial run of 100 pieces.

We DO NOT have them in inventory yet, but you can pre-order and reserve yours in the initial run today. We don’t know if the demand will be high enough to continue these in the future.

We should have these in hands for ordering in 6-8 weeks.

Pre-order and Reserve yours today, this first run will go quick.

 

Video – SmithFly 1X Pouch Feature Overview

This is the first in a series of videos covering the details of the SmithFly product line. This first one covers the 1X Pouch. Enjoy!

These are now back in stock and ready to ship.

Get yours before this round sells out, and they do go quick!